Mon to Fri, 8:00am to 5:00pmUtalii Court, Gesora Road, Nairobi

+254 184 379 590+254 719 450 317 Altinfo@gstechguard.co.ke

About us

About Gs Techguard Services LTD

Gs Techguard Services LTD is a Nairobi-based technical installer that designs, installs and supports security systems, network infrastructure, fire safety systems, AV and PA, UPS power backup, IT support and industrial weighing for organisations across Kenya. This page explains who we are, how we work and what you can expect from GS TechGuard.

  • One team for security, network, fire and power
  • Clear scopes, tidy work and full documentation
  • Support that continues after handover
The GS TechGuard team discussing a client project in Nairobi

Many organisations in Kenya deal with a different contractor for every technical system: one for cameras, one for the fire alarm, one for the network and another for the UPS. When something fails, each points to the others. GS TechGuard exists to fix that. We bring security, network, fire safety, AV, power and weighing under one accountable team, so your systems are designed to work together and you have one partner to call.

How it works

Who we are and what GS TechGuard installs

Gs Techguard Services LTD is based in Nairobi and works with clients across Kenya. The business is fully registered with the Business Registration Service (BRS) in Kenya under the legal name Gadgetstation & Techguard Services Ltd, and GS TechGuard is the name we trade under. Our technicians and engineers install and support:

Why choose us

Why GS TechGuard works differently

In fact, most problems we are called to fix come from gaps between systems. A door that stays locked during a fire because nobody linked it to the alarm. Cameras that stop during outages because the UPS only covered the server. Wi-Fi that drops because access points were never cabled properly. By designing these systems together, we close those gaps on purpose.

That approach also saves money, because shared work costs less and nothing gets installed twice. One survey, one cable plan and one power backup design serve several systems. In addition, you receive one set of drawings, one password pack and one maintenance plan.

Technician testing network cables in an office rack
At GS TechGuard, every link and device is tested before handover.

How it works

How we work

Every project follows the same steps, whatever its size. As a result, clients always know what comes next:

  1. Listen. We start by understanding how your site runs and what worries you most.
  2. Survey. Next, an engineer walks the site and records risks, routes and existing equipment.
  3. Design and quote. You receive a written scope and an itemised quote with brands and quantities.
  4. Install. Our team works neatly, with proper containment, labelling and minimal disruption.
  5. Test and commission. Then we test every device and record the results.
  6. Train and hand over. Your staff learn daily tasks, and you receive drawings, passwords and records.
  7. Support. We remain available for faults, upgrades and planned maintenance.

About GS TechGuard

Our principles

  • Honesty about scope. We say clearly what we do and where you need other professionals, such as registered fire safety auditors or accredited calibration laboratories.
  • Claims we can prove. We only describe brands, certifications and response times that we can back up. If you need copies of company documents, ask and we will share them.
  • Quality you can check. Test results, labels and drawings make our work transparent.
  • Respect for privacy. We design CCTV and biometric systems with data protection in mind.
  • Long-term thinking. We choose equipment with local support and spare parts, so systems last.

Team and credentials

Today, our team includes installation technicians, network engineers, fire and life safety technicians and support staff, coordinated from our Nairobi base. Team members train on the equipment we install, and we keep records of manufacturer training relevant to each project. Because GS TechGuard is fully registered with the Business Registration Service as Gadgetstation & Techguard Services Ltd, all quotes, contracts and invoices carry that legal name. On request, we share the company registration certificate, tax compliance documents and the qualifications of the engineers assigned to your project.

As we grow, we will introduce key team members on this page with their roles and experience, so you know who you are dealing with.

Supporting clients after handover

The day a system goes live is the start of our relationship, not the end. After handover, clients can call or message us with questions, book maintenance visits and ask for changes as their sites grow. Many choose a maintenance contract, which brings scheduled visits, priority support and records for audits. Others prefer to call when needed. Either way, they deal with the same team that installed the system, so nothing gets lost between suppliers. In addition, our records of each site mean we can often solve problems over the phone before sending a technician.

About GS TechGuard

Equipment and partners

Likewise, we install and support equipment from established manufacturers, choosing models with reliable local supply and support. Where we hold formal partner or authorised installer status with a manufacturer, we state it in the proposal. We do not display logos to suggest relationships we do not have.

Trusted technology partners and platforms

We design, install and support systems built on these recognised security, networking, communication, safety, power, AV, connectivity and cybersecurity platforms. Logos are trademarks of their respective owners.

Security & Surveillance

  • Hikvision
  • Dahua Technology
  • Axis Communications
  • Bosch Security Systems
  • Hanwha Vision
  • Motorola Solutions (Avigilon)

Networking & Infrastructure

  • Ubiquiti (UniFi)
  • Cisco Systems
  • MikroTik
  • D-Link
  • TP-Link
  • Aruba Networks (HPE)
  • Huawei

Access Control & Communication

  • ZKTeco
  • Suprema
  • HID Global
  • Yealink
  • Grandstream Networks
  • ASSA ABLOY

Safety & Power

  • APC (Schneider Electric)
  • Honeywell
  • Notifier
  • Tyco Security Products

ISP Partners

  • Safaricom Business
  • Liquid Intelligent Technologies
  • Faiba

Professional Audio, Visual & Automation

  • Poly (Polycom / HP)
  • Logitech Video Collaboration
  • Crestron Electronics
  • Extron Electronics
  • QSC
  • Shure
  • Sennheiser
  • Bose Professional

Cybersecurity Solutions

  • Palo Alto Networks
  • CrowdStrike
  • Fortinet
  • Cloudflare
  • Okta
  • Zscaler
  • Check Point Software
  • SentinelOne
  • Trend Micro
  • Sophos
  • Microsoft Security
  • Cisco Security
  • Bitdefender

About GS TechGuard

The story behind GS TechGuard

GS TechGuard grew from a simple observation. Clients kept calling technicians to fix problems that were not really technical failures, but coordination failures between systems. A fire alarm installer had never spoken to the access control installer. An IT company had set up the network without room for cameras. An electrician had wired the UPS without knowing which loads mattered. Each contractor did their part, yet the building still did not work as one.

So we built a team that covers all of these trades, with a shared way of documenting and testing work. That lets us take responsibility for the whole picture. It also means we think about the next five years of a site, not just the next invoice. When a client calls GS TechGuard, they reach people who understand how their cameras, doors, alarms, network and power depend on each other.

How it works

What makes a good installer

We believe a good installer is judged years after handover, not on the day the system switches on. Good installers leave clear labels, honest documents and systems that staff can use. They choose equipment that can be repaired locally. They also tell clients the truth about costs, limits and maintenance. These are the standards GS TechGuard holds itself to, and we encourage clients to hold every supplier to them too.

Where we work

From Nairobi, we serve clients across Kenya, including Mombasa, Kisumu, Nakuru, Eldoret, Kiambu, Thika, Ruiru, Kitengela, Machakos, Nyeri, Meru and Kakamega. See our service areas for local details.

Working with GS TechGuard

In our experience, clients value three things most: clear communication, tidy work and support after handover. We aim to deliver all three on every job. To see what projects look like, visit our projects page. For costs, our price guide gives indicative ranges.

Our values in practice

Values only matter when they show up in daily work. For us, that means arriving when we say we will, cleaning up at the end of each day and explaining problems plainly. It also means saying no to work we cannot do well, and recommending a specialist instead. When we make a mistake, we fix it quickly and tell you what changed. These habits build the trust that keeps clients with GS TechGuard for many years.

Our commitment to safety and compliance

Because our work touches life safety, personal data and electrical systems, so we take compliance seriously. We follow manufacturer guidelines and recognised standards, keep escape routes usable when installing locks, and design systems that support your duties under Kenyan law. The Occupational Safety and Health Act and the Data Protection Act shape much of our design work.

About GS TechGuard

Contact GS TechGuard

The quickest way to start is to request a quote or call us on +254 184 379 590. You can also message us on WhatsApp. We reply within one working day and arrange a site survey at a time that suits you. You can also follow GS TechGuard on LinkedIn, Instagram, X, TikTok and Facebook for project updates and practical tips.

Get started

Book a site survey

Tell us about your site and an engineer will call you back within one working day to discuss your needs and arrange a visit.

  • Clear, itemised written quote
  • Security, network, fire and power from one team
  • Support and maintenance after handover

Prefer to talk? Call +254 184 379 590

We reply within one working day. Or call +254 184 379 590.

Frequently asked questions

What does GS TechGuard do?

GS TechGuard designs, installs and supports security systems, network infrastructure, fire safety systems, AV and PA, UPS power backup, IT support and industrial weighing. We work with offices, schools, estates, warehouses, hospitals, hotels and other organisations across Kenya.

Where is GS TechGuard based?

We are based in Nairobi and serve clients across Kenya, including Mombasa, Kisumu, Nakuru, Eldoret, Thika and many other towns. Site surveys can be arranged in most areas.

Can GS TechGuard handle several systems in one project?

Yes. Our main strength is designing security, fire, network and power systems together, so they share cabling and power backup and work as one. You get one point of contact and one set of documents.

Is GS TechGuard a registered company?

Yes. GS TechGuard is fully registered with the Business Registration Service (BRS) in Kenya. Our legal registered name is Gadgetstation & Techguard Services Ltd, and that name appears on our quotes, contracts and invoices.

Can I see company documents before hiring you?

Yes. On request, we share company registration, tax compliance and the qualifications of the engineers assigned to your project. We also provide references from past clients who have agreed to share their experience.

Planning a project or fixing a fault?

Tell us about the site. We will arrange a survey, give you a clear written quote and explain the options in plain language.

CallWhatsAppAsk usQuote